$21.20
Description
Maytag – Admiral – Norge – Magic Chef – Sears Kenmore Washer Belt 21352320
- 3/8 in. V/Belt
- 51 in. Length
We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
Installation Instructions
Replacing the WP21352320 Whirlpool Drive Belt
This guide provides instructions on how to replace the Whirlpool WP21352320 drive belt. It is important to remember that you must unplug any appliance before performing repairs.
1. Unplug the appliance from the power source and then move it out of the way. Locate the drive belt, which is typically located around the motor.
2. To release the tension on the drive belt, use a flathead screwdriver or hex wrench to remove the screws that hold the motor bracket in place.
3. Carefully slide the motor bracket off the motor. You may need to use a pair of pliers to remove the drive belt from the pulley.
4. Once the drive belt is removed, replace it with the new WP21352320 belt. Make sure the belt is tightened securely.
5. Reattach the motor bracket with the screws. Plug in the appliance and test the motor by turning it on.
Congratulations! You have successfully replaced the Whirlpool WP21352320 drive belt.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available.
