$45.38
Description
The 285785 Whirlpool Washer Direct Drive Clutch is the perfect replacement part for your washer. It is an OEM certified direct drive clutch specifically made to fit Whirlpool washers. This clutch ensures that you can get your laundry done with ease and reliability every time you use it. It is also easy to install and comes with all the necessary instructions and hardware for a quick and hassle-free installation. With its strong and durable construction, you can be sure that this part will last you for a long time. Start getting your laundry done with confidence – get the 285785 Whirlpool Washer Direct Drive Clutch today! We’re your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Installation Instructions
How to Replace a Whirlpool Washer Direct Drive Clutch (Model 285785)
There are some key components of every laundry appliance that require maintenance from time to time. One of these components is the direct drive clutch, which is common in Whirlpool washers like the 285785 model. If your direct drive clutch needs to be replaced, don’t worry—this can be done as a DIY project with some simple tools and the instructions provided here.
Before you start, make sure you have all the necessary tools and parts. You will need a Phillips head screwdriver, needle-nose pliers, a flat head screwdriver, a torque wrench, and a replacement direct drive clutch, which is available at most major hardware stores.
Step 1: Unplug your washer from the power source and turn off any water connected to the machine.
Step 2: Locate the back panel of your washer and remove it using the Phillips head screwdriver.
Step 3: Look for the direct drive clutch, which is a long plastic cylinder on the side of the washing machine, and detach it from the rest of the system by unclipping the wires and loosening the screws with the flat head screwdriver.
Step 4: Use the needle nose pliers to disconnect the wires leading off the direct drive clutch and remove it from the washer.
Step 5: Take the new direct drive clutch and attach the wires accordingly before carefully placing it into the washing machine. Be sure to use the torque wrench to tighten the screws firmly, but not too tight.
Step 6: Finally, reconnect the back panel and secure it with the Phillips head screwdriver.
Your Whirlpool washer (Model 285785) should now be functioning as normal with its new direct drive clutch. Congratulations on completing this DIY repair!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer’s manual, if available.
